How to Attach a Spoiler

One of the easiest and most common ways to customize and add personality to your car is to attach a spoiler to your car. A spoiler is a piece added to the top of the trunk or back of the car. For it's practical use, it aids in air flow and weight to keep the car grounded while racing. For aesthetic purposes, a spoiler is decorative and is an expression of personal style. Spoilers are very easily customizable and can be purchased or hand-crafted and can also be installed by professionals at body shops are on your own at home. If you are comfortable with tools and tinkering with your car, installing your own spoiler can be simple. If you install your own spoiler, you can save money you would spend on part and labor at a body shop. If you are unsure of your abilities to install your own spoiler, it would be wise to at least start with a quote from your local trusted body shop.

To do your own body shop work at home, be prepared. Have the proper tools and learn the safety precautions necessary for auto body work. The first step to installing a spoiler on your car is to properly measure your spoiler and your car to make sure it will fit (hopefully this will have been done before you buy the spoiler).

The spoiler will come with wing brackets, so start by attaching and tighting the brackets and the spoiler. Be sure the screws and bolts are fully tightened, or else the spoiler could come loose, or it could detach from your car later. Next, position the spoiler on your car to determine exactly where you want it to go. Measure accurately to ensure the spoiler is properly centered, side to side and front to back. Be certain the spoiler is facing the right way. Place small marks on the car where you need to drill, and set the spoiler aside.

Slowly drill holes through the top of the trunk's sheet metal all the way through the metal on the underside of the trunk. Drill holes only large enough to fit the bolts. Clean up after yourself, including vaccuuming up the metal scraps from the drill on the inside of the trunk. Use a small sander to smooth the drilled holes. It is important to also use touch-up paint around the drill holes to help prevent rust.

Make sure washers are in place and steadily bolt the spoiler in place. Each bolt should have equal pressure, and the spoiler should be firmly attached-- not loose at all.

Take a step back and admire your handiwork! Rather than spend money at body shops, you have successfully attached a spoiler and performed your own custom auto body work. Congratulations!

» posted in Custom Body Work

| 31 reads | 0 comments |

0 votes: